EcoForce Eliminator
$1,899
$1,899
EcoForce Eliminator Pest
FREE Ground shipping within the continental 48 US states
The EcoForce Eliminator Pest, 120V electric heat system
- National Electric code compliant on 15 amp, 120volt circuits. This makes for easy setup almost anywhere.
- Built-in digital thermostat control is pre-set to get you in the kill zone and then keep you there for enhanced performance while heating for bed bugs, and their eggs.
- 6000 Watts, 20,460 btu’s, hi-temperature plastic & fan motor
- 37 Lbs. each – Stackable, Lightweight and easy to carry
- Higher temperature rise while using less electricity. The “EcoForce Eliminator” outperforms electric heat systems by producing a higher Delta T temperature rise. This is better for focus heating containments, tenting, etc…
- Built in High temperature / low amperage fan – This fan is rated for continuous use at 140F.
- Hi-Temperature plastic – not the cheap stuff others use
- NEC compliant on 15 amp circuits. This means you can safely use any electrical outlet in the building or home. No other system has this feature.
- Fully duct-able in and out for container applications in which the EcoForce Eliminator can be outside the container making for more room inside the container.
- 3 tier heater element safety system. You don’t have to worry about the safety of this machine.
- No cool down necessary. Advanced filaments allow you to shutoff the unit without a cool down process with complete safety.
- Non-finned heating elements. Finned heating elements catch the lint and aerosolized particulates creating a fire hazard and frequent cleaning. This is not an issue with our advance filament heating elements and design.
The EcoForce Eliminator comes standard with a digital thermostat control that lets you set the temperature. This brings the temperature up to your setting and then holds that temperature for effecient pest killing.
The EcoForce Eliminator has a ramp up power feature when you don’t need to use full power, and also has (4) sets of heating elements. Each set is 12 amps at 120volt. You can use 1,2,3 or all 4 heater elements. This allows you to use just the power you need and leaves a lot of electricity for your other equipment.
NEC ® Compliant Yes (20amp Breaker) AmpsBTU’s 12/Circuits (4)/120vac20,460 Air Volume 325 CFM Fan Speed 1 Speed Weight 37 lbs Dimensions 28.3″X13.95″X15.75″ Fuel Electric Additional Equipment Required 4 x 12 gauge extension cords (not included)
- National Electric code compliant on 15 amp, 120volt circuits. This makes for easy setup almost anywhere.
- Built-in digital thermostat control is pre-set to get you in the kill zone and then keep you there for enhanced performance while heating for bed bugs, and their eggs.
- 6000 Watts, 20,460 btu’s, hi-temperature plastic & fan motor
- 37 Lbs. each – Stackable, Lightweight and easy to carry
- Higher temperature rise while using less electricity. The “EcoForce Eliminator” outperforms electric heat systems by producing a higher Delta T temperature rise. This is better for focus heating containments, tenting, etc…
- Built in High temperature / low amperage fan – This fan is rated for continuous use at 140F.
- Hi-Temperature plastic – not the cheap stuff others use
- NEC compliant on 15 amp circuits. This means you can safely use any electrical outlet in the building or home. No other system has this feature.
- Fully duct-able in and out for container applications in which the EcoForce Eliminator can be outside the container making for more room inside the container.
- 3 tier heater element safety system. You don’t have to worry about the safety of this machine.
- No cool down necessary. Advanced filaments allow you to shutoff the unit without a cool down process with complete safety.
- Non-finned heating elements. Finned heating elements catch the lint and aerosolized particulates creating a fire hazard and frequent cleaning. This is not an issue with our advance filament heating elements and design.
The EcoForce Eliminator has a ramp up power feature when you don’t need to use full power, and also has (4) sets of heating elements. Each set is 12 amps at 120volt. You can use 1,2,3 or all 4 heater elements. This allows you to use just the power you need and leaves a lot of electricity for your other equipment.
| NEC ® Compliant | Yes (20amp Breaker) |
| AmpsBTU’s | 12/Circuits (4)/120vac20,460 |
| Air Volume | 325 CFM |
| Fan Speed | 1 Speed |
| Weight | 37 lbs |
| Dimensions | 28.3″X13.95″X15.75″ |
| Fuel | Electric |
| Additional Equipment Required | 4 x 12 gauge extension cords (not included) |
